



Harvia Cilindro PC90 Cilindro Half Series 9kW Sauna Heater, 240V / 1PH
- 🚚Free freight shipping to the lower 48 states. The carrier calls you to schedule delivery.
- 📍Check your ZIP code for free shipping:
- 📦In stock. Usually ships in 1-2 business days.
- 💳Pay over time with Shop Pay Installments, subject to approval. Financing details
- 📖Before you buy: Heater sizing guide · Power and wiring · Best sauna heaters
- 🛒Compare more: Shop all Harvia
- 📞Questions? Call or text Drew at (737) 377-2909.
- Product Description
- Product Features
- Product Specifications
- Delivery Policy
- Warranty
240V single-phase.
141-494Cubic feetRoom size, per Harvia.
200 lbStonesSold separately.
40 inTallA floor-standing pillar.
The design
A steel pillar with an open front
The Harvia Cilindro PC90 is a floor-standing pillar heater for rooms of 141 to 494 cubic feet, per Harvia. Its steel casing is partly open at the front, so a tall column of stones shows. Pour water in the middle or on top of the pillar to shift the steam between gentle and sharp, per Harvia.
- 9 kW at 240V single-phase
- About 40 in high, 14 in wide, 13 in deep, 37.5 lb, per Harvia
- Built-in timer and heat dial
The install
Wired by an electrician, bolted to the floor
Harvia's USA manual lists 37.5 A on a single supply with AWG 8 copper wire rated 194 F (90 C), or a two-group hookup at 25 A with AWG 10. Do not feed it through a GFCI. Harvia lists 4 in in front, 1.2 in at the sides and back, and 35 in to the ceiling.
- 37.5 A at 240V, AWG 8 copper (single supply)
- No GFCI on the heater feed
- Clearances: 4 in front, 1.2 in sides and back, 35 in ceiling
Buy with confidence
Pay over time
Shop Pay Installments by Affirm at checkout, subject to approval.
Damage covered
Inspect it when it arrives and report any damage within 48 hours with photos, and we'll make it right.
Warranty terms
Harvia's USA manual gives one year for family use and 3 months for communal use, covering manufacturing and material defects. It is void if a licensed electrician does not install it or the registration form is not returned within 15 days. Call or text us and we'll confirm the terms before you buy.
Talk to a real person
Call or text (737) 377-2909 about room size and wiring.
The detailsSpecifications
| Maker | Harvia |
| Model | Cilindro PC90 |
| SKU | HPCS9U1HB |
| Type | Floor-standing electric pillar heater |
| Output | 9 kW |
| Size | About 40 in high, 14 in wide, 13 in deep, per Harvia |
| Weight | 37.5 lb, per Harvia |
| Controls | Built in: heat dial and timer that runs 60 minutes, with a delay of up to 8 hours |
| Room size | 141 to 494 cu ft, per Harvia |
| Floor area | 23 to 79 sq ft, per Harvia |
| Room height | At least 75 in (6 ft 3 in) |
| Power | 240V single-phase |
| Current | 37.5 A single supply, or 25 A two-group |
| Wire | AWG 8 copper (single supply), AWG 10 (two-group), rated 194 F |
| Clearances | 4 in front, 1.2 in sides and back, 35 in ceiling |
| Warranty | 1 year family use per Harvia; call to confirm |
What's in the box
- Cilindro PC90 heater with built-in controls
- Installation and operating instructions
What you'll need
- Sauna stones, up to 200 lb (5 boxes), 2 to 4 in across, sold separately
- A licensed electrician and a 240V single-phase circuit with a disconnect that breaks all poles
Specs as listed by Harvia for the Harvia Cilindro PC90 9 kW Sauna Heater with Built-In Controls, 240V.
Before you buyPick your Cilindro Half heater
Cilindro PC60
Cilindro PC80
Cilindro PC90
9 kW, rooms up to 494 cu ft. This one.
What to expectFrom order to first session
-
We confirm your order
You get your delivery timeline before it ships.
-
Free shipping
It ships free to the lower 48. Inspect it when it arrives, and report any damage within 48 hours with photos.
-
Place and wire it
Set it on the floor at the clearances above, have a licensed electrician wire it and fasten it to the floor with at least two screws or bolts, then load the stones.
-
Load stones and heat
Stack a dense layer of stones against the steel grid and the rest loosely, then set the heat dial and timer. Harvia suggests 149 to 167 F.
Frequently asked questions
What size sauna is it for?
Rooms of 141 to 494 cubic feet, or 23 to 79 square feet of floor, per Harvia, with a ceiling at least 75 in high.
What electrical does it need?
240V single-phase. Harvia's USA manual lists 37.5 A with AWG 8 copper on a single supply, or 25 A with AWG 10 on a two-group hookup, and no GFCI on the heater feed. Call or text us at (737) 377-2909 and we will confirm the circuit before you buy.
Does it come with stones?
No. The stones are sold separately. Harvia calls for up to 200 lb of angular split-face sauna stones, 2 to 4 in across, and says to rearrange them at least once a year.
How do the controls work?
Turn the timer and the heater runs for 60 minutes, or set a start up to 8 hours ahead. The heat dial holds the room at your setting. Start at the top and turn it down if the room gets too hot.
How long is the warranty?
Harvia's USA manual gives one year for family use and 3 months for communal use, covering manufacturing and material defects. It is void if a licensed electrician does not install it or the registration form is not returned within 15 days. Call or text us and we'll confirm the terms before you buy.
How does shipping work?
Free shipping to the lower 48. You get your delivery timeline before it ships.
What's the return policy?
Please read our return policy before you order.
| Brand | Harvia |
|---|---|
| Installation | Side wall or corner of room |
| Housing | Stainless Steel |
| Controls | Built-in controls |
| Element Position | Elements run down center of heater |
| Elements | Stainless Steel |
| Stone Capacity | Sold separately: 200 lbs stones (5 × 44 lbs of 5–10 cm stones) |
| PRODUCT INCLUSIONS | |
| Sauna Heater | Included |
| Water Reservoir | Included |
| Temperature Sensor | Included |
| Installation and Operation Manual | Included |
| 1-Year Limited Warranty | Included |
| Brand | Harvia |
|---|---|
| Models | N/A |
| Controller | N/A |
| Weight | 37 lbs |
| Dimensions | 14"W x 13"D x 45"H (360mm x 340mm x 1150mm) |
| Power (kW) | 9.0 |
| BTU | 9000 |
| Voltage | 240 VAC |
| Current | 37.5 A |
| Phase | 1 PH |
| Breaker | 2x30 A |
| Room Size | 141 – 494 CU. FT. |
| Shipping Weight | 200 lbs |
Orders are processed and shipped within 24 to 48 hours. Most items are shipped via Ground or LTL freight, depending on the product size and weight. Sauna barrels and cabins include shipping or use a flat rate within the contiguous 48 states. For other items, actual shipping rates apply based on location. In hard-to-reach areas, a shipping premium may apply. Stones ship separately and incur $25 to $50 per box in shipping fees. Enhanced packaging is used for all shipments to reduce damage in transit. Customers may refuse delivery if damage is visible, or sign “Subject to concealed damage.”
Applicability: Warranty applies only if the product is installed per the provided instructions, properly maintained, and hasn’t been subjected to damage, misuse, or abuse.
Registration: You must complete and mail the Limited Warranty Registration form (included with your unit) to Bathing Brands within 60 days of installation. This warranty is non-transferable and extends only to the original purchaser.
Duration of Coverage:
PARTS
- Residential: 5 years from date of original installation.
- Commercial (clubs, condos, apartments, spas, military): 1 year from date of original installation.
- Brand exceptions: Huum products carry only a 90-day parts warranty.
LABOR
- Residential (U.S., non-commercial): 2 years of local labor coverage, plus an additional 3 years of factory labor if the product is returned to Bathing Brands.
- Commercial (U.S.): 1 year of factory labor (upon return) for defective parts; parts remain covered for 1 year.
Authorized Warranty Work: All warranty repairs must be (1) authorized by Bathing Brands before work begins and (2) performed by an authorized World Sauna Group representative. Any parts or labor performed without prior authorization won’t be covered.
Return Merchandise Authorization (RMA): Before returning any parts, you must obtain an RMA from Bathing Brands. Parts returned without an RMA may be refused replacement or repair.
Claim Procedure:
- Call Bathing Brands toll-free at 1-800-929-5425 or write to:
Bathing Brands – WSG 511 Glenn Ave, Wheeling, IL 60090
- Ship defective parts prepaid to that address. Return shipping of replacements is at the purchaser’s expense.
Limitations & Remedies:
- Liability is limited to repair or replacement of defective parts.
- Bathing Brands isn’t liable for any incidental or consequential damages.
- Some state laws may provide additional rights that supersede these limitations.

- Product Description
- Product Features
- Product Specifications
- Delivery Policy
- Warranty
240V single-phase.
141-494Cubic feetRoom size, per Harvia.
200 lbStonesSold separately.
40 inTallA floor-standing pillar.
The design
A steel pillar with an open front
The Harvia Cilindro PC90 is a floor-standing pillar heater for rooms of 141 to 494 cubic feet, per Harvia. Its steel casing is partly open at the front, so a tall column of stones shows. Pour water in the middle or on top of the pillar to shift the steam between gentle and sharp, per Harvia.
- 9 kW at 240V single-phase
- About 40 in high, 14 in wide, 13 in deep, 37.5 lb, per Harvia
- Built-in timer and heat dial
The install
Wired by an electrician, bolted to the floor
Harvia's USA manual lists 37.5 A on a single supply with AWG 8 copper wire rated 194 F (90 C), or a two-group hookup at 25 A with AWG 10. Do not feed it through a GFCI. Harvia lists 4 in in front, 1.2 in at the sides and back, and 35 in to the ceiling.
- 37.5 A at 240V, AWG 8 copper (single supply)
- No GFCI on the heater feed
- Clearances: 4 in front, 1.2 in sides and back, 35 in ceiling
Buy with confidence
Pay over time
Shop Pay Installments by Affirm at checkout, subject to approval.
Damage covered
Inspect it when it arrives and report any damage within 48 hours with photos, and we'll make it right.
Warranty terms
Harvia's USA manual gives one year for family use and 3 months for communal use, covering manufacturing and material defects. It is void if a licensed electrician does not install it or the registration form is not returned within 15 days. Call or text us and we'll confirm the terms before you buy.
Talk to a real person
Call or text (737) 377-2909 about room size and wiring.
The detailsSpecifications
| Maker | Harvia |
| Model | Cilindro PC90 |
| SKU | HPCS9U1HB |
| Type | Floor-standing electric pillar heater |
| Output | 9 kW |
| Size | About 40 in high, 14 in wide, 13 in deep, per Harvia |
| Weight | 37.5 lb, per Harvia |
| Controls | Built in: heat dial and timer that runs 60 minutes, with a delay of up to 8 hours |
| Room size | 141 to 494 cu ft, per Harvia |
| Floor area | 23 to 79 sq ft, per Harvia |
| Room height | At least 75 in (6 ft 3 in) |
| Power | 240V single-phase |
| Current | 37.5 A single supply, or 25 A two-group |
| Wire | AWG 8 copper (single supply), AWG 10 (two-group), rated 194 F |
| Clearances | 4 in front, 1.2 in sides and back, 35 in ceiling |
| Warranty | 1 year family use per Harvia; call to confirm |
What's in the box
- Cilindro PC90 heater with built-in controls
- Installation and operating instructions
What you'll need
- Sauna stones, up to 200 lb (5 boxes), 2 to 4 in across, sold separately
- A licensed electrician and a 240V single-phase circuit with a disconnect that breaks all poles
Specs as listed by Harvia for the Harvia Cilindro PC90 9 kW Sauna Heater with Built-In Controls, 240V.
Before you buyPick your Cilindro Half heater
Cilindro PC60
Cilindro PC80
Cilindro PC90
9 kW, rooms up to 494 cu ft. This one.
What to expectFrom order to first session
-
We confirm your order
You get your delivery timeline before it ships.
-
Free shipping
It ships free to the lower 48. Inspect it when it arrives, and report any damage within 48 hours with photos.
-
Place and wire it
Set it on the floor at the clearances above, have a licensed electrician wire it and fasten it to the floor with at least two screws or bolts, then load the stones.
-
Load stones and heat
Stack a dense layer of stones against the steel grid and the rest loosely, then set the heat dial and timer. Harvia suggests 149 to 167 F.
Frequently asked questions
What size sauna is it for?
Rooms of 141 to 494 cubic feet, or 23 to 79 square feet of floor, per Harvia, with a ceiling at least 75 in high.
What electrical does it need?
240V single-phase. Harvia's USA manual lists 37.5 A with AWG 8 copper on a single supply, or 25 A with AWG 10 on a two-group hookup, and no GFCI on the heater feed. Call or text us at (737) 377-2909 and we will confirm the circuit before you buy.
Does it come with stones?
No. The stones are sold separately. Harvia calls for up to 200 lb of angular split-face sauna stones, 2 to 4 in across, and says to rearrange them at least once a year.
How do the controls work?
Turn the timer and the heater runs for 60 minutes, or set a start up to 8 hours ahead. The heat dial holds the room at your setting. Start at the top and turn it down if the room gets too hot.
How long is the warranty?
Harvia's USA manual gives one year for family use and 3 months for communal use, covering manufacturing and material defects. It is void if a licensed electrician does not install it or the registration form is not returned within 15 days. Call or text us and we'll confirm the terms before you buy.
How does shipping work?
Free shipping to the lower 48. You get your delivery timeline before it ships.
What's the return policy?
Please read our return policy before you order.
| Brand | Harvia |
|---|---|
| Installation | Side wall or corner of room |
| Housing | Stainless Steel |
| Controls | Built-in controls |
| Element Position | Elements run down center of heater |
| Elements | Stainless Steel |
| Stone Capacity | Sold separately: 200 lbs stones (5 × 44 lbs of 5–10 cm stones) |
| PRODUCT INCLUSIONS | |
| Sauna Heater | Included |
| Water Reservoir | Included |
| Temperature Sensor | Included |
| Installation and Operation Manual | Included |
| 1-Year Limited Warranty | Included |
| Brand | Harvia |
|---|---|
| Models | N/A |
| Controller | N/A |
| Weight | 37 lbs |
| Dimensions | 14"W x 13"D x 45"H (360mm x 340mm x 1150mm) |
| Power (kW) | 9.0 |
| BTU | 9000 |
| Voltage | 240 VAC |
| Current | 37.5 A |
| Phase | 1 PH |
| Breaker | 2x30 A |
| Room Size | 141 – 494 CU. FT. |
| Shipping Weight | 200 lbs |
Orders are processed and shipped within 24 to 48 hours. Most items are shipped via Ground or LTL freight, depending on the product size and weight. Sauna barrels and cabins include shipping or use a flat rate within the contiguous 48 states. For other items, actual shipping rates apply based on location. In hard-to-reach areas, a shipping premium may apply. Stones ship separately and incur $25 to $50 per box in shipping fees. Enhanced packaging is used for all shipments to reduce damage in transit. Customers may refuse delivery if damage is visible, or sign “Subject to concealed damage.”
Applicability: Warranty applies only if the product is installed per the provided instructions, properly maintained, and hasn’t been subjected to damage, misuse, or abuse.
Registration: You must complete and mail the Limited Warranty Registration form (included with your unit) to Bathing Brands within 60 days of installation. This warranty is non-transferable and extends only to the original purchaser.
Duration of Coverage:
PARTS
- Residential: 5 years from date of original installation.
- Commercial (clubs, condos, apartments, spas, military): 1 year from date of original installation.
- Brand exceptions: Huum products carry only a 90-day parts warranty.
LABOR
- Residential (U.S., non-commercial): 2 years of local labor coverage, plus an additional 3 years of factory labor if the product is returned to Bathing Brands.
- Commercial (U.S.): 1 year of factory labor (upon return) for defective parts; parts remain covered for 1 year.
Authorized Warranty Work: All warranty repairs must be (1) authorized by Bathing Brands before work begins and (2) performed by an authorized World Sauna Group representative. Any parts or labor performed without prior authorization won’t be covered.
Return Merchandise Authorization (RMA): Before returning any parts, you must obtain an RMA from Bathing Brands. Parts returned without an RMA may be refused replacement or repair.
Claim Procedure:
- Call Bathing Brands toll-free at 1-800-929-5425 or write to:
Bathing Brands – WSG 511 Glenn Ave, Wheeling, IL 60090
- Ship defective parts prepaid to that address. Return shipping of replacements is at the purchaser’s expense.
Limitations & Remedies:
- Liability is limited to repair or replacement of defective parts.
- Bathing Brands isn’t liable for any incidental or consequential damages.
- Some state laws may provide additional rights that supersede these limitations.
