An undersized heater warms slowly and may never reach the temperature you want. An oversized one costs more and may need bigger wiring. Here is how to size one.
Step 1: Measure room volume
Multiply length × width × height in feet. A 5' × 6' × 7' room is 210 cubic feet.
Step 2: Use a rough rule of thumb
Many manufacturers suggest about 1 kW per 45–50 cubic feet for a well-insulated room. Always check the specific heater's published room-size range, because that is what the warranty is based on.
| Room volume | Typical heater size |
|---|---|
| Up to ~200 cu ft | 4.5 kW |
| ~200–300 cu ft | 6 kW |
| ~300–400 cu ft | 8 kW |
| ~400–500 cu ft | 9–10.5 kW |
Step 3: Adjust for heat loss
Glass doors and walls, stone or tile, and uninsulated walls all lose heat. Manufacturers often say to add volume for each square foot of glass or masonry. When you are between two sizes, ask us before ordering.
Step 4: Check your electrical panel
Most home sauna heaters run on 240V and need a dedicated breaker sized to the heater. Have a licensed electrician confirm your panel capacity and wire size before you buy.
Shop heaters
Compare sauna heaters and controls, including Harvia and HUUM. Not sure about room size? See our sauna size guide.
Questions? Call or text (737) 377-2909 or email support@elitesaunasupply.com. Standard shipping is free on every order to the lower 48 states.

Leave a comment
This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.